Monitoring Plans for Part 75 Sources
Instructions: click on a facility name in the table to display detailed information.
ORIS Code | Facility Name | State | View |
---|
Overview
This tool provides access to information for sources affected by 40 CFR Part 75. Location, ownership and contact information, unit attributes, and monitoring plan data is presented for each facility.
What is in a monitoring plan?
The monitoring plan describes how a facility monitors its emissions. Monitoring plan data define relationships between stacks, pipes, and units; specify locations at a facility from which emissions are monitored; and identify monitoring equipment including the individual system components. Monitoring plan data also provide characteristics of operations and physical and unit characteristics such as stack height, cross sectional area, fuel type, air pollution control devices, and size of the unit(s).
How to Access
To view more information, select a facility from the list on the left. A series of tabs will be displayed. To view the monitoring plan, open the "Monitoring Plans" tab and select a unit and/or stack from the list.
Sorting and Filtering
The facility list can be sorted in ascending or descending order by selecting a column heading. Additionally, the facility list can be dynamically filtered according to the search box content. Sorting and filtering applies to ORIS Code, Facility Name, and State.
Support
For technical support with the monitoring plans, please contact your regional analyst. For any issues you encounter with this application, please email monitoringplans@epa.gov.
Map Options
Instructions: click on a unit ID in the table to display detailed information.
Unit ID | Commence Operation Date | Status | View |
---|
Instructions: click on a unit/stack name in the table to open a monitoring plan.
Unit/stack name | Status | Begin Year, Quarter | End Year, Quarter | View |
---|
Location
On this page:
Reporting frequency
Monitoring plan location ID(s) | Reporting frequency code | Reporting frequency | Begin quarter | End quarter |
---|
Monitoring location attributes
Duct indicator | Ground elevation (ft) | Stack height (ft) | Cross area exit (ft2) | Cross area flow | Material code | Material | Shape code | Shape | Begin date | End date |
---|
Stack/pipes and unit relationships
Associated unit | Bypass stack indicator | Activation date | Retirement date | Begin date | End date |
---|
Unit operations
Commence operation date | Commercial operation date | Boiler/turbine type code | Boiler/turbine type | Boiler/turbine begin date | Boiler/turbine end date | Max heat input (mmBtu) | Heat input begin date | Heat input end date |
---|
Unit programs
Program code | Program | Unit class code | Unit class | Certification begin date | Certification deadline |
---|
Unit fuels
Fuel type code | Fuel type | Fuel indicator code | Fuel indicator | Demonstration method for GCV code | Demonstration method for GCV | Demonstration method for daily sulfur code | Demonstration method for daily sulfur | Ozone season indicator | Begin date | End date |
---|
Unit controls
Parameter code | Parameter | Control equipment code | Control equipment | Original indicator | Seasonal indicator | Installation date | Optimization date | Retirement date |
---|
Monitoring methods
Parameter code | Parameter | Methodology code | Methodology | Substitute data approach code | Substitute data approach | Bypass approach code | Bypass approach | Begin time | End time |
---|
MATS supplemental monitoring methods
Parameter code | Parameter | Methodology code | Methodology | Begin time | End time |
---|
Monitoring systems
Span values
Component type code | Component type | Scale code | Scale | Method code | Method | MPC/MPF | MEC | Span value | Full-scale range | Units of measure code | Units of measure | Flow span value (scfh) | Scale transition point | Default high-range value | Flow full scale range | Begin time | End time |
---|
Monitoring system fuel flow
System ID | Fuel code | Fuel | Max fuel flow rate | Units of measure code | Units of measure | Source code | Source | Begin time | End time |
---|
Analyzer Range Data
Component type code | Component type | Component ID | Range code | Range | Dual Range indicator | Begin time | End time |
---|
Emissions Formulas
Parameter code | Parameter | Formula ID | Formula code | Formula description | Formula | Begin Time | End Time |
---|
Rectangular duct wall adjustment factor
WAF determined date | WAF effective date/time | WAF method code | WAF method code description | WAF value | No. of test runs | No. of traverse pts. WAF | No. of test ports | No. of traverse pts. Ref | Duct width | Duct depth | WAF end date/time |
---|
Unit/stack/pipe load and operating information
Max hourly load | Units of measure code | Units of measure | Upper bound of range of operation | Lower bound of range of operation | Normal operation level code | Normal operation level | Second operation level code | Second operation level | Second normal indicator | Load analysis date | Begin time | End time |
---|
Monitoring defaults
Parameter code | Parameter | Value | Units of measure code | Units of measure | Purpose code | Purpose | Fuel type code | Fuel type | Operating condition code | Operating condition | Source of value code | Source of value | Begin time | End time |
---|
Qualification
Qualification type code | Qualification type | Begin date | End date | Qualification year | Average % | Year 1 | Year 1 data type code | Year 1 data type | Year 1 % | Year 2 | Year 2 data type code | Year 2 data type | Year 2 % | Year 3 | Year 3 data type code | Year 3 data type | Year 3 % |
---|
Comments
Top of page