An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

Effluent Guidelines

Learn about Effluent Guidelines

""Effluent Guidelines are national wastewater discharge standards that are developed by EPA on an industry-by-industry basis. These are technology-based regulationsHelpTechnology-based regulationA regulation based on the performance of wastewater treatment and control technologies. The discharge standards are developed independently of the potential impact of a discharge on the receiving water body. (Impacts on specific receiving waters are addressed through other Clean Water Act mechanisms: Water Quality Standards and water quality-based effluent limitations in individual permits)., and are intended to represent the greatest pollutant reductions that are economically achievable for an industry. The standards for direct dischargersHelpdirect dischargerA point source that discharges pollutants to waters of the United States, such as streams, lakes, or oceans. are incorporated into National Pollutant Discharge Elimination System (NPDES) permits issued by States and EPA regional offices, and permits or other control mechanisms for indirect dischargersHelpindirect dischargerA facility that discharges pollutants to a publicly owned treatment works (municipal sewage treatment plant). (see Pretreatment Program).

On this page:

Development of Effluent Guidelines

To develop Effluent Guidelines, EPA first gathers information on:
  • industry practices
  • characteristics of discharges (e.g., pollutants, flow variability, stormwater)
  • technologies or practices used to prevent or treat the discharge
  • economic characteristics

EPA identifies the best available technology that is economically achievable for that industry and sets regulatory requirements based on the performance of that technology. The Effluent Guidelines do not require facilities to install the particular technology identified by EPA; however, the regulations do require facilities to achieve the regulatory standards which were developed based on a particular model technology.


Pollutant Types

Clean Water Act (CWA) section 304(a)(4) designates the following as "conventional" pollutants: biochemical oxygen demand (BOD5), total suspended solids (TSS), fecal coliform, pH, and any additional pollutants EPA defines as conventional. The Agency designated "oil and grease" as an additional conventional pollutant on July 30, 1979 (see 44 FR 44501).

EPA has identified 65 pollutants and classes of pollutants as "toxic pollutants", of which 126 specific substances have been designated "priority" toxic pollutants. All other pollutants are considered to be "nonconventional."

Top of Page


Levels of Control

National regulations for industrial wastewater discharges set technology-based numeric limitations for specific pollutants at several levels of control: BPT, BAT, BCT, NSPS, PSNS or PSES. Each of these terms is defined below. Effluent limitations are based on performance of specific technologies, but the regulations do not require use of a specific control technology.

Type of Sites Regulated BPT BCT BAT NSPS PSES PSNS
Existing Direct Dischargers      
New Direct Dischargers          
Existing Indirect Dischargers          
New Indirect Dischargers          
Pollutants Regulated BPT BCT BAT NSPS PSES PSNS
Priority Pollutants  
Conventional Pollutants      
Nonconventional Pollutants  

BPT

Best Practicable Control Technology Currently Available is defined at CWA section 304(b)(1). In specifying BPT, EPA looks at a number of factors:

  • the total cost of applying the control technology in relation to the effluent reduction benefits
  • age of the equipment and facilities
  • processes employed by the industry and any required process changes
  • engineering aspects of the control technologies
  • non-water quality environmental impacts, including energy requirements
  • other factors as EPA deems appropriate

Traditionally, EPA establishes BPT effluent limitations based on the average of the best performance of facilities within the industry of various ages, sizes, processes or other common characteristics. Where existing performance is uniformly inadequate, BPT may reflect higher levels of control than currently in place in an industrial category if the Agency determines that the technology can be practically applied.

BCT

Best Conventional Pollutant Control Technology, defined at CWA section 304(b)(4), addresses conventional pollutants from existing industrial point sources. In addition to considering the other factors specified in section 304(b)(4)(B), EPA establishes BCT limitations after consideration of a two part "cost-reasonableness" test. The initial BCT methodology and some BCT effluent limitations were published in 1979. A revised methodology, with additional effluent limitations, and some revised limitations, were published in 1986.

1986 Amendment

1979 Initial Rulemaking

BAT

Best Available Technology Economically Achievable is defined at CWA section 304(b)(2). In general, BAT represents the best available economically achievable performance of plants in the industrial subcategory or category. Factors considered in assessing BAT include:
  • cost of achieving BAT effluent reductions
  • age of equipment and facilities involved
  • the processes employed by the industry and potential process changes
  • non-water quality environmental impacts, including energy requirements
  • other factors as EPA deems appropriate

NSPS

New Source Performance Standards, defined at CWA section 306, apply to direct dischargers. NSPS reflect effluent reductions that are achievable based on the "best available demonstrated control technology." New sources have the opportunity to install the best and most efficient production processes and wastewater treatment technologies. As a result, NSPS should represent the most stringent controls attainable through the application of the best available demonstrated control technology for all pollutants (i.e., conventional, non-conventional, and priority pollutants). In establishing NSPS, EPA is directed to take into consideration the cost of achieving the effluent reduction and any non-water quality environmental impacts and energy requirements.
  • Definition of "new source" for direct dischargers: 40 CFR 122.2, 122.29

PSNS

Pretreatment Standards for New Sources is defined at CWA section 307(c). PSNS are national, uniform, technology-based standards that apply to dischargers to publicly owned treatment worksHelppublicly owned treatment worksA treatment works that is owned by the state or municipality. (POTWs) from specific industrial categories (i.e., indirect dischargers). They are designed to prevent the discharges of pollutants that pass through, interfere with, or are otherwise incompatible with the operation of POTWs. PSNS are to be issued at the same time as NSPS. The Agency considers the same factors in promulgating PSNS as it considers in promulgating NSPS.

New indirect dischargers have the opportunity to incorporate into their plants the best available demonstrated technologies. Users subject to PSNS are required to achieve compliance within the shortest feasible time, not to exceed 90 days from commencement of discharge.

PSES

Pretreatment Standards for Existing Sources is defined at CWA section 307(b). Like PSNS, PSES are national, uniform, technology-based standards that apply to indirect dischargers. They are designed to prevent the discharge of pollutants that pass through, interfere with, or are otherwise incompatible with the operation of POTWs.

Dischargers subject to PSES are required to comply with those standards by a specified date, typically no more than three years after the effective date of the categorical standard.

BMPs

Best Management Practices are defined as a permit condition used in place of, or in conjunction with effluent limitations, to prevent or control the discharge of pollutants. BMPs may include a schedule of activities, prohibition of practices, maintenance procedure, or other management practice.

Sections 304(e), 308(a), 402(a), and 501(a) of the CWA authorize EPA to prescribe BMPs as part of Effluent Guidelines and Standards or as part of a permit.
 
BMP regulations:

CWA section 304(e) authorizes EPA to include BMPs in Effluent Guidelines for certain toxic or hazardous pollutants for the purpose of controlling "plant site runoff, spillage or leaks, sludge or waste disposal, and drainage from raw material storage." CWA section 402(a)(1) and 40 CFR 122.44(k) also provide for BMPs to control or abate the discharge of pollutants when numeric limitations and standards are infeasible.

Top of Page


Analytical Methods

In order for a numeric limit to be enforceable, an approved analytical method—a test procedure to measure the parameter—must be available. CWA section 304(h) directs EPA to promulgate analytical methods, and these are published at 40 CFR Part 136. EPA-approved methods published by other organizations are also listed in Part 136.

Top of Page


Effluent Guidelines Program Plans

CWA section 304(b) requires EPA to annually review and, if appropriate, revise Effluent Guidelines. EPA publishes a plan every other year, establishing a schedule for annual review and revision, pursuant to section 304(m). This plan also identifies industries discharging more than trivial amounts of toxic or nonconventional pollutants, such as nutrients, for which the Agency has not yet promulgated Effluent Guidelines. EPA is required to establish a schedule for completing Effluent Guidelines for these industries within three years, and the Agency must take public comment on its proposed plan prior to issuing a final plan. The plan announces any EPA decisions to proceed with rulemakings which may lead to new requirements for direct discharging facilities covered by existing Effluent Guidelines.

EPA reviews pretreatment standards under a separate planning process, required by CWA section 304(g). EPA generally evaluates discharges from indirect dischargers as part of the 304(m) plan when industrial categories discharging toxic or non-conventional pollutants are composed of both direct and indirect dischargers.

Top of Page


Implementation

Effluent Guidelines are implemented through the NPDES Permit Program. Direct dischargers are regulated by permits that specify limits using BPT, BAT, BCT and NSPS.

Pretreatment standards are implemented through the National Pretreatment Program. Indirect dischargers are regulated through categorical standards issued based on PSNS and PSES.

Top of Page


Industries and/or Pollutants not Specifically Regulated by Effluent Guidelines

Top of Page