An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

OSR-10

TECHNICAL PRODUCT BULLETIN #SW-59
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: JUNE 28, 2011
"OSR-10"
LAST COMMUNICATION WITH MANUFACTURER: 09/27/2012
LAST ATTEMPT: 3/21/2018

I. NAME, BRAND, OR TRADEMARK
OSR-10
Type of Product: Surface Washing Agent
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT
MAG7 Venture Group, LLC DBA MAG7 Technologies
1 Lepage Place, Suite 100
Syracuse, NY 13206
Phone: Updated information required
Fax: Updated information required
E-mail: Updated information required
(Mr. Greg Goodell or Mr. Trevor Quig)
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS
MAG7 Venture Group, LLC DBA MAG7 Technologies
1 Lepage Place, Suite 100
Syracuse, NY 13206
Phone: Updated information required
Fax: Updated information required
E-mail: Updated information required
(Mr. Greg Goodell or Mr. Trevor Quig)
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION
1. Flammability: Non-flammable
2. Ventilation: Move subject to fresh air. If breathing is difficult, obtain medical help.
3. Skin and eye contact; protective clothing; treatment in case of contact: Wash affected skin area with water. Consult physician of irritation persists. Skin irritation will not occur with most users. Flush eyes with a large amount of water for at least 15 minutes. Consult physician if irritation persists. Wear safety glasses and neoprene or rubber gloves during application.
4.a. Maximum storage temperature: 120°F
4.b. Minimum storage temperature: 35°F
4.c. Optimum storage temperature range: 40°F to 120°F
4.d. Temperatures of phase separations and chemical changes: NA. Phase separation will not occur within the storage range. Product should be stored out of direct sunlight unless it is in an Ultraviolet (UV) light resistant container.
V. SHELF LIFE
2 years in a sealed (unopened) container (tote, drum, pail) as delivered. 1 year in an opened container).
VI. RECOMMENDED APPLICATION PROCEDURE
1. Application Method: Apply OSR-10 to oil or contaminant with sprayer, pressure washer, mop, sponge, or brush. Application times will depend on the level of contaminant with a minimum of 10 minutes recommended soak time. The required soak time to remove oil will vary with oil density and degree of weathering. OSR-10 separates the oil from the physical surface to allow the oil to be sprayed off with a water rinse. OSR-10 should be mixed into soil applications and agitated to increase the effectiveness and reduce the application time.

2. Concentration/Application Rate: Dilution ratios for most applications range from 2 to 1 (parts water to parts OSR-10) to 15 to 1 (parts water to parts OSR-10). Dilution ratios are dependent on the contamination level and application with heavier crude oil spills requiring a lower dilution ratio. Rinse with water after usage for residue free surface. Surface cleaning typically requires 5 to 1 or 10 to 1 dilution ratio. These dilution ratios will require 1 gallon of OSR-10 per 300 square feet of surface area. These dilution ratios can be used in many applications including shorelines, rocks, and beaches.

3. Conditions for Use: Salt or fresh water (temperature ranges from 35°F to 120°F). Oil or contaminant can be skimmed from the water or rinsed and captured into collection containers and disposed of per local, state, and federal regulations.
 
Dilution Intended Use
2:1
5:1 to 10:1
15:1 to 30:1
Heavy/severe contamination such as oil spills
Moderate contamination
Light contamination
VII.TOXICITY AND EFFECTIVENESS
a. Toxicity:
Material Tested Species LC50 (ppm)
OSR-10 Menidia beryllina
Mysidopsis bahia
385.00 96-hr
399.00 48-hr
No. 2 Fuel Oil Menidia beryllina
Mysidopsis bahia
26.30 96-hr
4.86 48-hr
OSR-10 & No. 2 Fuel Oil (1:10) Menidia beryllina
Mysidopsis bahia
16.00 96-hr
4.77 48-hr
Reference Toxicant (SDS) Menidia beryllina
Mysidopsis bahia
2.23 96-hr
7.93 48-hr

b. Effectiveness:
NA
VIII. MICROBIOLOGICAL ANALYSIS
NA
IX. PHYSICAL PROPERTIES
1. Flash Point: 143°F
2. Pour Point: 20°F
3. Viscosity: 37 SUS @60°F
4. Specific Gravity: 1.1672 @60°F
5. pH: 11.5
6. Surface Active Agents: CONFIDENTIAL
7. Solvents: CONFIDENTIAL
8. Additives: CONFIDENTIAL
9. Solubility: Complete in water
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS
Compound Concentration (ppm)
Arsenic ND
Cadmium ND
Chromium 0.209
Copper 0.150
Lead 7.57
Mercury 6.8 (ppb)
Nickel 1.20
Zinc ND
Cyanide ND
Chlorinated Hydrocarbons ND

Top of Page