An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

WMI-2000

TECHNICAL PRODUCT BULLETIN #B-19
USEPA, OEM REGULATIONS IMPLEMENTATION DIVISION
ORIGINAL LISTING DATE: JUNE 18, 1990
REVISED LISTING DATE: JANUARY 11, 1996
"WMI-2000"

I. NAME, BRAND, OR TRADEMARK
WMI-2000
Type of Product: Biological Additive
II. NAME, ADDRESS, AND TELEPHONE NUMBER OF MANUFACTURER/CONTACT
WMI International, Inc.
2104 Brentwood Drive
Houston, TX 77019
Phone: (713) 526-5829
Mobile: (832) 798-5610
Fax: (877) 347-7770
Email: wmiintlinc@gmail.com or teri@oxygenorchard.com
(Joseph F. Jennings, President)
Mailing Address
WMI International, Inc.
P.O. Box 130583
Houston, TX 77219
(Mr. Joseph F. Jennings, President)
III. NAME, ADDRESS, AND TELEPHONE NUMBER OF PRIMARY DISTRIBUTORS
WMI International, Inc.
2104 Brentwood Drive
Houston, TX 77019
Phone: (713) 526-5829
Mobile: (832) 798-5610
Fax: (877) 347-7770
Email: wmiintlinc@gmail.com or teri@oxygenorchard.com
(Joseph F. Jennings, President)
Mailing Address
WMI International, Inc.
P.O. Box 130583
Houston, TX 77219
(Mr. Joseph F. Jennings, President)
IV. SPECIAL HANDLING AND WORKER PRECAUTIONS FOR STORAGE AND FIELD APPLICATION
1. Flammability:
WMI-2000 is non-flammable.
2. Ventilation:
Avoid breathing dust or aerosol due to possibility of sensitization. Use adequate ventilation.
3. Skin and eye contact; protective clothing; treatment in case of contact:
Minimize contact with eyes, skin, and clothing. Wash hands thoroughly after handling culture.
4.a. Maximum storage temperature: 100ºF
4.b. Minimum storage temperature: 35ºF
4.c. Optimum storage temperature range: 45ºF - 90ºF
Store in a cool, dry location. Keep partially-used containers tightly closed. Prolonged exposure to high temperature and humidity may lower activity of product.
4.d. Temperatures of phase separations and chemical changes: NA
V. SHELF LIFE
The shelf life of WMI-2000 is 2 years if stored at ambient temperatures
VI. RECOMMENDED APPLICATION PROCEDURE
1. Application Method:
The culture should be activated for 2 hours in water, when applicable. Conditions for use vary depending on substrate concentration and type, pH, temperature, availability of nutrients, oxygen content, and liquid medium (static or flowing).
2. Concentration/Application Rate:
Inoculation concentration is 5-9 billion spores per gram.
3. Conditions for Use:
Temperature requirements are between 35ºF and 100ºF. The optimum dissolved oxygen content is 2 ppm at the sludge-to-water interface. Nitrogen and phosphorous are key nutrients which promote cultural growth, and should be maintained at concentrations of 15-20 ppm and 2.5-5 ppm, respectively. The optimum pH range is between 7.0 and 8.0.
VII. TOXICITY AND EFFECTIVENESS
a. Toxicity:
NA

b. Effectiveness:
Bioremediation Agent Effectiveness Test (40 CFR 300.900), Federal Register September 15, 1994:

Summary Data Table:
DAYS PRODUCT
3 REPS/PROD
TOTAL MEAN
ALKANES (ppm)
RED%
28 DAYS
TOTAL MEAN
AROMATICS (ppm)
RED%
28 DAYS
0 CONTROL
NUTRIENT
WMI-2000
2626.7
2763.3
2453.3
0
0
0
1850.0
2030.0
1880.0
0
0
0
7 CONTROL
NUTRIENT
WMI-2000
2246.7
1920.0
1243.3
0
0
0
1823.3
1666.7
1456.7
0
0
0
28 CONTROL
NUTRIENT
WMI-2000
2240.0
1210.0
973.3
14.7
56.2
60.3
1866.7
1480.0
1253.0
-0.9
27.0
33.3


Results of Gravimetric Analysis:
Percentage (%) Decrease in Weight of Oil on Day 28
Control: 0%
Nutrient: 25%
Product (WMI-2000): 44%
VIII. MICROBIOLOGICAL ANALYSIS
1. Listing of all microorganisms by species and percentage in the composition:
CONFIDENTIAL
2. Optimum pH, temperature, and salinity ranges for use of the additives:
Optimum pH: 7.0
Optimum temperature: 45ºF - 90ºF
Optimum salinity: Fresh water to sea water
3. Minimum and maximum pH, temperature, and salinity levels below or above which the effectiveness of the additive is reduced to half its optimum capacity:
pH: 6.0 - 8.0
Temperature: 40ºF - 120ºF
Salinity range: Fresh to sea water
4. Special nutrient requirements:
none
5. Test results regarding the determination of the following:
Salmonella - Negative
Fecal Coliform - Negative
Shigella - Negative
Staphylococcus Coagulase positive - Negative
Beta hemolytic streptococcus - Negative
IX. PHYSICAL PROPERTIES
NA
X. ANALYSIS FOR HEAVY METALS, CYANIDE, AND CHLORINATED HYDROCARBONS
NA

Top of Page