An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

MSDS reporting for various blends of gasoline

A service station stores both leaded and unleaded gasoline on-site.  For the purpose of EPCRA  311 hazardous chemical inventory reporting, is the owner/operator of the facility required to submit separate material safety data sheets (MSDS) for each type of gasoline, or is a single MSDS sufficient?

Section 311 of EPCRA requires the owner/operator of a facility to submit a MSDS to the state and local authorities for each hazardous chemical present at the facility above appropriate thresholds.  A hazardous chemical is defined under Occupational Safety and Health Act (OSHA) regulations codified at 40 CFR 1910.1200(c) as any chemical which poses a physical or health hazard.  This definition also applies to EPCRA 311 and 312.  A facility owner or operator is required under OSHA to prepare and maintain a MSDS for each hazardous chemical present on-site.  The OSHA Hazard Communication Standard at 29 CFR 1910.1200(g)(4) specifies, however, that where complex mixtures have similar hazards and contents, it is sufficient to prepare one MSDS to apply to all similar mixtures.  OSHA interprets this provision to permit the preparation of a single MSDS to cover all blends of leaded and unleaded gasoline, provided that hazards associated only with leaded gasoline, or only with unleaded gasoline, are identified separately on the MSDS.  Consequently, the requirements under EPCRA 311 can be met either by submitting a separate MSDS for each type of gasoline if available, or by submitting one MSDS for all gasoline blends at the facility.