An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

Leaching Environmental Assessment Framework (LEAF) Methods and Guidance

The Leaching Environmental Assessment Framework (LEAF) is a leaching evaluation system, which consists of four leaching methods, data management tools, and scenario assessment approaches designed to work individually or to be integrated to provide a description of the release of inorganic constituents of potential concern (COPCs) for a wide range of solid materials. The LEAF Methods have been designed to consider the effect of key environmental conditions and waste properties on leaching. The LEAF How-To Guide describes how the LEAF method results can be used to develop screening level assessments of constituent release or to develop more accurate estimates of release in specific use or disposal scenarios.


LEAF Methods

Method 1313 - Liquid-Solid Partitioning as a Function of Extract pH Using a Parallel Batch Extraction Procedure

Method 1313 is designed to evaluate the partitioning of constituents between liquid and solid phases at or near equilibrium conditions over a wide range of pH values. The method consists of 9-10 parallel batch extractions of solid material at various target pH values.

Method 1314 - Liquid-Solid Partitioning as a Function of Liquid-Solid Ratio for Constituents in Solid Materials Using an Up-Flow Percolation Column Procedure

Method 1314 is a percolation column test designed to evaluate constituent releases from solid materials as a function of cumulative liquid-to-solid ratio. The method consists of a column packed with granular material with moderate compaction. Eluent is pumped up through the column to minimize air entrainment and preferential flow.

Method 1315 - Mass Transfer Rates of Constituents in Monolithic or Compacted Granular Materials Using a Semi-Dynamic Tank Leaching Procedure

Method 1315 is a semi-dynamic tank leaching procedure used to determine the rate of mass transport from either monolithic materials (e.g., concrete materials, bricks, tiles) or compacted granular materials (e.g., soils, sediments, fly ash) as a function of time using deionized water as the leaching solution. The method consists of leaching a sample in a bath with periodic renewal of the leaching solution at specified cumulative leaching times.

Method 1316 - Liquid-Solid Partitioning as a Function of Liquid-Solid Ratio Using a Parallel Batch Extraction Procedure

Method 1316 is an equilibrium-based leaching test intended to provide eluate solutions over a range of liquid-to-solid ratios. This method consists of five parallel batch extractions of a particle-size-reduced solid material in reagent water over a range of liquid-to-solid ratios. At the end of the contact interval, the liquid and solid phases are separated for constituent analysis.

Top of Page


LEAF "How-To" Guide

The purpose of the LEAF "How-To" Guide is to provide an understanding of the Leaching Environmental Assessment Framework to facilitate its broader use in environmental assessment. The guide provides background on the LEAF methods, guidance on how to perform the methods, and guidance on how to understand the method results. It also provides guidance on the application of LEAF to assess leaching potential of COPCs from solid waste materials for beneficial use, disposal, treatment, and remediation applications. In addition, the guide addresses frequently-asked questions about the four LEAF methods, data management and reporting using freely-available software, and potential applications of the LEAF approach.


Beneficial Use

LEAF may be useful in estimating the environmental impacts from utilization of secondary materials, primarily as construction materials. Leaching data from LEAF or other relevant leaching tests can be used in EPA’s Methodology for Evaluating Beneficial Uses of Industrial Non-Hazardous Secondary Materials, which presents a voluntary approach for evaluating potential adverse impacts to human health and the environment from a wide range of industrial non-hazardous secondary materials and their associated beneficial uses. Prior to beneficially using secondary materials in any projects, interested individuals or organizations should consult with the relevant state and federal environmental agencies to ensure proposed uses are consistent with state and federal requirements.


Cleanups under CERCLA

LEAF may also find application in support of cleanup decisions under the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) that address specific contaminants on a site-specific basis. The performance values against which LEAF would be evaluated may differ depending on the specific regulatory program involved. For example, site-specific data is used to determine whether action is warranted at a site. Furthermore, under CERCLA as stated in the National Oil and Hazardous Substances Pollution Contingency Plan, “levels generally should be attained throughout the contaminated plume, or at and beyond the waste management area when waste is left in place” (55 FR 8753, March 8, 1990). Decision-makers should consult with the appropriate regulatory agency to ensure compliance when using LEAF testing in support of an evaluation.

Under CERCLA, cleanup decisions depend on site-specific factors. General guidance on use of LEAF data that would be applicable to all sites is impractical and beyond the scope of the How-to Guide. As such, EPA expects to provide additional guidance on the use of LEAF for CERCLA response actions as experience with LEAF evolves.

Top of Page


Frequent Questions about the LEAF Methods and "How-To" Guide

EPA has developed answers to frequently asked questions about the LEAF Methods and "How-To" Guide.

Top of Page


LEAF Response to Public Comments

The public comment period for the LEAF methods and "How-To" Guide closed on January 31, 2018. Although submissions will no longer be accepted, the EPA Docket can be viewed by searching for ID# EPA-HQ-OLEM-2017-0210. EPA reviewed all comments and published a Response to Comments document along with the final versions of the methods and “How-To” Guide.

Top of Page


Useful Resources

Data Management and Modeling Software

Agency Leaching Studies

Top of Page