Hazardous Waste Cleanup: Stone Industrial Division of Precision Products Group Incorporated in College Park, Maryland
On this page:
- Cleanup Status
- Site Description
- Contaminants at this Facility
- Institutional/Engineer Controls
- Land Reuse
- Site Responsibility
The College Park location manufactures plastic tubing for the household motor industry under the name Stone Industrial Precision Products Group Inc. The site has manufactured custom spiral-wound products and tubing since 1950.
Review of all available records and discussions during a June 22, 2010, site visit indicate there was a single release of 450 gallons of Methyl Ethyl Ketone in 1989 that was contained and cleaned up under Maryland Department of the Environment supervision. All hazardous wastes are stored and managed indoors.
A Final Resource Conservation and Recovery Act (RCRA) Site Visit Report was issued on August 11, 2010 for the Facility. A Statement of Basis (SOB) was noticed on December 28, 2010. The EPA issued its Final Decision regarding the Facility on February 7, 2011, stating that Corrective Action was Complete without Controls.
Interactive Map of Stone Industrial, College Park, Maryland
View larger map
The Facility consists of three building located on 17 acres at 9207 51st Avenue, College Park, Maryland. The Facility is located in southern Maryland just inside the I-495 beltway around Washington D.C. and to the east of I-95. The site is located in a commercial/residential area and is bordered by the B&O Railroad tracks along the eastern border.
There was a single release of 450 gallons of Methyl Ethyl Ketone in 1989 that was contained and cleaned up under Maryland Department of the Environment (MDE) supervision.
Institutional Controls were not required at the site.
The site's future use is yet to be determined.
RCRA Corrective Action activities at this facility are being conducted under the direction of the EPA Region 3 with assistance from Maryland Department of Environmental Protection.