Hazardous Waste Cleanup: Reilly Finishing Technologies in Nanticoke, Pennsylvania
On this page:
- Cleanup Status
- Site Description
- Contaminants at this Facility
- Institutional/Engineer Controls
- Land Reuse
- Site Responsibility
There is no contamination in soil or groundwater at the Facility. No further actions are necessary at the Facility. EPA's Final Decision of Corrective Action Complete without controls for the Facility became effective August 14, 2009.
Interactive Map of Reilly Finishing Technologies, Nanticoke, Pennsylvania
View larger map
The site is comprised of approximately 0.5 acres of land located in Nanticoke, Luzerne County, Pennsylvania. A primarily residential/small industrial area is located immediately north, south, and west of the site. The majority of the site is comprised of a 27,000 square foot building. Reilly is involved in metal finishing, primarily for the aerospace and electronic industries. The major facility operations consist of electroless nickel and zinc plating. A small portion of chrome and copper work is also performed. Methylene chloride and mineral spirits had been used in the manufacturing processes. In 1994, solvents were eliminated from the manufacturing processes.
There is no contamination in soil or groundwater at the facility.
Institutional Controls were not required at the facility.
The facility is under continued use.
Resource Conservation and Recovery Act (RCRA) Corrective Action activities at this facility have been conducted under the direction of EPA Region 3.