PG&E Gas Transmission Northwest Corporation - Permitting Information
1. Facility Information
PG&E Gas Transmission Northwest Corporation
2. Location
Sandpoint, Idaho. Bonner County. UTM Coordinates (km): 538.1, 5364.6
3. Distance from US/Canada Border
40 miles
4. Facility Type and Size
Existing 29,100 horsepower (ISO) natural gas pipeline compressor station utilizing two combustion turbines. Applicant proposes to install an additional turbine to increase capacity by 19,500 horsepower (ISO).
5. Sources of Emissions
Natural gas fired turbines
6. Type of Fuel
Natural gas
7. Type and Quantity of Emissions
&
8. Emission Control Technology
For new 19,500 horsepower (ISO) gas fired combustion turbine, maximum permitted potential to emit considering controls:
| Pollutant | Quantity of Emissions (tons / yr) |
Emission Control Technology |
|---|---|---|
| PM10 | 4.21 | Pipeline natural gas & good combustion practices |
| SO2 | 1.79 | Pipeline natural gas & good combustion practices |
| NOx | 85.4 | Pipeline natural gas & SoLoNOx™ |
| VOC | 1.34 | Pipeline natural gas & good combustion practices |
| CO | 74.8 | Pipeline natural gas & good combustion practices |
9. Date Permit Application Received
August 21, 2001. Draft permit proposed to public February 1, 2001. Final permit issued April 4, 2002.
10. Stack Height and Diameter
Height: 59 feet
Square Width: 8 feet
11. Permit Agency Contact
Idaho Department of Environmental Quality
Air Quality Division
Attn: Mike DuBois
1410 N. Hilton
Boise, ID 83706-1255
Phone: 208.373.0502