An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

New Source Review (NSR) Permitting

Rotaforge, Inc. (new facility) - Permitting Information

1. Facility Information

Rotaforge, Inc. (new facility)

2. Location

4350 Navarre Avenue
Oregon, Ohio 43616

3. Distance from US/Canada Border

Approximately 45 km

4. Facility Type and Size

Steel Mill and Forging Operation with a capacity to produce or process 300,000 tons of steel per year.

5. Sources of Emissions

Electric Arc Furnace
Ladle Metallurgy Facility
Miscellaneous Melt Shop Operations
Continuous Caster
Re-Heat Furnace
Forging Operations
Heat Treatment Furnaces

6. Type of Fuel

Natural Gas

7. Type and Quantity of Emissions

CO 631.29 tpy
NOx 404.42 tpy
PM   83.69 tpy
PM10   68.69 tpy
SO2   31.49 tpy
VOC   60.79 tpy
Lead   0.1 tpy

8. Emission Control Technology

Under negotiations with Region 5 of the USEPA
Proposed by Source: PM10
Direct Evacuation Canopy Hood to Baghouse
NOx  Low NOx Burners
CO    Direct Evacuation Canopy Hood (H20 Cooled Duct)
VOC  Scrap Management

9. Date Permit Application Received

December 03, 1998

10. Stack Height and Diameter


11. Permit Agency Contact

Ohio Environmental Protection Agency
Division of Air Pollution Control, Attn: Misty Parsons
Lazarus Government Center
P.O. 1049
Columbus, OH 43216-1049

Data Entered: 01/20/1999