An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

Nutrient Pollution

The Sources and Solutions: Wastewater

Wastewater Treatment Plants

large wastewater treatment container
Wastewater treatment plants process water from homes and businesses, which contains nitrogen and phosphorus from human waste, food and certain soaps and detergents.
man pumping out a septic system
Septic systems can easily become a source of nutrient pollution if not properly maintained.

Most homes and businesses send their wastewater to a treatment plant where many pollutants are removed from the water. Wastewater treatment facilities in the United States process approximately 34 billion gallons of wastewater every day. Wastewater contains nitrogen and phosphorus from human waste, food and certain soaps and detergents. Once the water is cleaned to standards set and monitored by state and federal officials, it is typically released into a local water body, where it can become a source of nitrogen and phosphorus pollution.

Some wastewater treatment plants are able to remove more nitrogen and phosphorus from their discharges than others depending on their equipment and how they treat wastewater. Enhanced treatment systems enable some wastewater plants to produce discharges that contain less nitrogen than plants using conventional treatment methods. Upgrading wastewater treatment systems is often expensive for municipalities and rate payers, but upgrades can pay for themselves or end up saving a plant money. Various strategies to reduce nitrogen and phosphorus loads from wastewater treatments plants are being pursued across the country.

Septic Systems

Approximately 20 percent of homes in the United States use septic systems that locally treat their wastewater. When a septic system is improperly managed, elevated nitrogen and phosphorus levels can be released into local water bodies or ground water. An estimated 10 to 20 percent of septic systems fail at some point in their operational lifetimes. Common causes of septic system failure include aging infrastructure, inappropriate design, overloading with too much wastewater in too short a period of time and poor maintenance.

Homeowners are responsible for maintaining their septic systems in most cases. To protect and maintain their system, homeowners should: