An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to www.epa.gov. This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

RadTown

Radioactive Material in Scrap Metal

Radiation Facts

  • If radioactive material is improperly disposed, it can contaminate and shut down an entire facility. The cost of cleaning up can easily exceed a million dollars.
  • You will probably never come into contact with contaminated scrap metal. However, if you think you have found contaminated scrap metal, do not touch it. Immediately contact the manager of the scrap yard and your state radiation office.

Sometimes radioactive materials are disposed of improperly and end up in scrap metal yards or landfills. Melting radioactive materials with non-radioactive materials scrap metal will create recycled metal that is now radioactive.

On this page:


About Radioactive Material in Scrap Metal

Radioactive materials should not be disposed of in the same manner as regular trash or recycling. There are special handling and disposal requirements for radioactive materials to keep radioactive materials out of regular junk yards and scrap metal yards.

Sometimes items containing small amounts of radioactive materials are disposed of improperly. This may be because the radioactive material is not marked properly, or the owner of the material does not follow proper disposal guidelines. These are often referred to as abandoned or orphaned sources.

Image of equipment at a scrap metal yard. 
Source: Occupational Safety and Health Administration (OSHA)

If radioactive materials are disposed of improperly or sent for recycling as scrap metal, they can end up at a facility that is not licensed to handle them. If a scrap metal yard or recycling facility unknowingly melts an item that contains radioactive material, the radioactive materials contaminate the metal, the processing equipment and the facility. Recycling radioactive materials at unlicensed facilities also exposes the workers to radiation.

To help detect incoming materials that should not be processed, recycling facilities have devices called portal monitors. These devices detect radiation when scanning batches of scrap metal. It is important to detect incoming radioactive materials before they are processed at a scrap metal yard because radioactively contaminated sites pose a health risk to workers and cleaning up processing equipment and processing sites can cost millions of dollars.

Top of Page

What You Can Do

Mechanical claw grabbing from a pile of scrap metal.

  • Be aware. It is highly unlikely that you would come into contact with radioactively contaminated scrap metal. However, if you think you have found contaminated scrap metal, do not touch it. Immediately contact  the manager of the scrap yard and your state radiation office.
  • Limit your exposure. Until you know differently, treat the suspected radioactive material as though it were a radioactive source and limit your exposure. Three basic ways to limit possible exposure include:
    • Time: Limit the time spent near the radiation source.
    • Distance: Increase the distance between you and the radiation source.
    • Shielding: Put something (the heavier and thicker, the better) between you and the radiation source.

Top of Page

Top of Page