Texas SIP: 30 TAC 114.2. Vehicle Inspection and Maintenance (I/M) Definitions; SIP effective 12/14/2001
§114.2. Inspection and Maintenance (I/M) Definitions.
As adopted by TNRCC December 6, 2000, effective January 18, 2001.
Approved by EPA November 14, 2001 (66 FR 57265) effective December 14, 2001 (TXd32)
Unless specifically defined in the TCAA or in the rules of the Texas Natural Resource Conservation Commission (commission), the terms used by the commission have the meanings commonly ascribed to them in the field of air pollution control. In addition to the terms which are defined by the TCAA, the following words and terms, when used in Subchapter C of this chapter (relating to Vehicle Inspection and Maintenance), shall have the following meanings, unless the context clearly indicates otherwise.
(1) Acceleration simulation mode (ASM-2) test - An emissions test using a dynamometer (a set of rollers on which a test vehicle’s tires rest) which applies an increasing load or resistance to the drive train of a vehicle, thereby simulating actual tailpipe emissions of a vehicle as it is moving and accelerating. The ASM-2 vehicle emissions test is comprised of two phases:
(A) the 50/15 mode - in which the vehicle is tested on the dynamometer simulating the use of 50% of the vehicle available horsepower to accelerate at a rate of 3.3 miles per hour (mph) per second at a constant speed of 15 mph; and
(B) the 25/25 mode - in which the vehicle is tested on the dynamometer simulating the use of 25% of the vehicle available horsepower to accelerate at a rate 3.3 mph per second at a constant speed of 25 mph.
(2) Consumer Price Index - The Consumer Price Index for any calendar year is the average of the Consumer Price Index for all-urban consumers published by the Department of Labor, as of the close of the 12-month period ending on August 31 of the calendar year.
(3) Motorist - A person or other entity responsible for the inspection, repair, and maintenance of a motor vehicle, which may include, but is not limited to, owners and lessees.
(4) On-board diagnostic (OBD) system - The computer system installed in a vehicle by the manufacturer which monitors the performance of the vehicle emissions control equipment, fuel metering system, and ignition system for the purpose of detecting malfunction or deterioration in performance that would be expected to cause the vehicle not to meet emissions standards.
(5) On-road test - Utilization of remote sensing technology to identify vehicles operating within the inspection and maintenance program areas that have a high probability of being high-emitters.
(6) Out-of-cycle test - Required emissions test not associated with vehicle safety inspection testing cycle.
(7) Primarily operated - Use of a motor vehicle greater than 60 calendar days per testing cycle in an affected county. Motorists shall comply with emissions requirements for such counties. It is presumed that a vehicle is primarily operated in the county in which it is registered.
(8) Program area - County or counties in which the Texas Department of Public Safety, in coordination with the commission, administers the vehicle emissions inspection and maintenance program contained in the revised Texas Inspection and Maintenance (I/M) State Implementation Plan. These program areas include:
(A) the Dallas/Fort Worth (DFW) program area which consists of the following counties: Dallas, Denton, Collin, and Tarrant;
(B) the El Paso program area which consists of El Paso County;
(C) the Houston/Galveston program area which consists of Brazoria, Chambers, Fort Bend, Galveston, Harris, Liberty, Montgomery, and Waller Counties; and
(D) the extended DFW (EDFW) program area which consists of Ellis, Johnson, Kaufman, Parker, and Rockwall Counties. These counties will become part of the program area as of May 1, 2003.
(9) Retests - Successive vehicle emissions inspections following the failing of an initial test by a vehicle during a single testing cycle.
(10) Testing cycle - Annual cycle commencing with the first safety inspection certificate expiration date for which a motor vehicle is subject to a vehicle emissions inspection.
(11) Two-speed idle inspection and maintenance test - A measurement of the tailpipe exhaust emissions of a vehicle while the vehicle idles, first at a lower speed and then again at a higher speed.
(12) Uncommon part - A part that takes more than 30 days for expected delivery and installation, where a motorist can prove that a reasonable attempt made to locate necessary emission control parts by retail or wholesale part suppliers will exceed the remaining time prior to expiration of the vehicle safety inspection certificate or the 30-day period following an out-of-cycle inspection.
Adopted April 19, 2000, Effective May 11, 2000
**** end tx 114.02 adopted by TNRCC 04/19/2000 ******ebze*d32*****c14**