README (Version 2003.11) README.TXT 12/1/2003 This readme file lists the system requirements for installing the PC Version of HAPEM5 model and provides instructions on how to install and run the model. The detailed instruction on how to run the model is provided in the "The HAPEM5 User's Guide." The PC version HAPEM5 model can be run on an IBM-compatible personal computer with an PENTIUM II or higher processor, a Window 95 or higher MS-DOS operating system, and a 200 MB or higher RAM. The program requires 700 MB disk space for installation and a minimum of 1.5 GB disk space to run. The installation procedures are as follows: 1. Click the Hapem5_setup icon in the CD-ROM; 2. Follow the instructions shown on the screen until the installation finishes; 3a. Open the Program fold window by clicking the Hapem5 folder icon or 3b. Open the MS-DOS window and go to the directory in which the hapem has been installed; 4. Unzip the input.zip file into the HAPEM5 directory. The following files are included in the hapem5 directory after installation: 1. Setup-path\hapem5: p1.txt The parameter input file, file 1 p2.txt The parameter input file, file 2 durav5.exe The PC-executable file for the Durav module indexpop5.exe The PC-executable file for the Indexpop module commute5.exe The PC-executable file for the Commute module airqual5.exe The PC-executable file for the Airqual module hapem5.exe The PC-executable file for the HAPEM module input The subdirectory for hapem input files output The subdirectory for hapem output files 2. Setup-path\hapem5\input: Activity The folder for activity pattern files for the Durav module Add The folder for Add factor input files AirQual The folder for ambient air quality files Commute The folder for commute pattern files Factor The folder for microfactor input files (Except for Add) Population The folder for population files 3. Setup-path\hapem5\output: Statefip.dat The input file for state fip codes 4. Setup-path\SRC: durav5.f90 The FORTRAN 90 source code for durav indexpop5.f90 The FORTRAN 90 source code for indexpop commute5.f90 The FORTRAN 90 source code for commute airqual5.f90 The FORTRAN 90 source code for airqual hapem5.f90 The FORTRAN 90 source code for hapem HAPEM5 is a non-interactive program. The parameters and input files are specified in p1.txt (for Durav, indexpop, and commute) and p2.txt (for airqual and hapem). The HAPEM model is run by executing hapem modules in the following order: durav5 indexpop5 commute5 airqual5 hapem5 To execute a module, type the name of the module and the name of a parameter file at the DOS prompt or clicking the executable icon in the program folder window. The example files are automatically installed and the program is ready to run. The user could test the model by running the HAPEM modules in the order as indicated above. The HAPEM5 Model User's Guide is provided in the userguide.wp file in the CD-ROM. For additional questions or comments on HAPEM5, please contact Arlene Rosenbaum or Mike Huang at (703) 934-3982 or via mhuang@icfconsulting.com.