Identification_Information: Citation: Citation_Information: Originator: U.S. Environmental Protection Agency/Office of Water/OST Publication_Date: 19980227 Title: Counties and County Equivalents Boundaries in the United States for BASINS Publication_Information Publication_Place: Washington DC Publisher: US EPA Online_Linkage: http://www.epa.gov/waterscience/basins/ Description: Abstract: This coverage is of the county boundaries of the conterminous United States. It was derived from the U.S. Geological Survey State Boundaries, which were derived from Digital Line Graph (DLG) files representing the 1:2,000,000-scale map in the National Atlas of the United States. Purpose: This coverage is intended as a basemap for a variety of applications. Supplemental_Information: Limitations_of_Data: The original files for this map were provided in 15 sections. Boundaries near the edges of sections have been adjusted in edgematching. Procedures: The BASINS data product was derived from the U.S. Geological Survey COUNTIES2M layer. The USGS procedures for that data product are followed by the BASINS procedures: This series of maps was published as part of the National Atlas of the United States (USGS, 1970). The maps for the conterminous United States were digitized in 15 sheets and published in the Digital Line Graph (DLG) format as described by Domeratz and others (1983). Each sheet was prepared by reading the DLG files of the political and water bodies layers, converting them to ARC/INFO, extracting the county boundaries and the coastline, respectively, and joining the two layers together. FIPS codes were assigned to all polygons using available sources, and were checked manually. Boundaries with adjacent sheets of the 15-sheet set were edgematched manually, arbitrarily choosing one of the sheets as the "correct" border. Edgematching operations adjusted the linework as far as was necessary so that the coverages would fit to a tolerance of 100 meters. The coverage (referred to herein as Version 1.0) was stored as 49 separate coverages (48 states and the District of Columbia) because the ARC/INFO software in use at the time could not process the entire coverage. Individual states could be joined by specifying a tolerance of 100 meters. From time to time, adjustments were made to the state coverages to reflect changes in U.S. counties. It is believed the accuracy of these adjustments is comparable to the original linework. For Version 2.0, all state coverages were rejoined and manually edited to produce a perfect edgematch between all states. For states on the original map sheet boundaries, this adjustment averaged less than 20 meters and in no case was more than 100 meters. The whole coverage was CLEANed to a tolerance of 20 meters, which resulted in few, if any, effects on small offshore islands. The coverage also was checked to ensure that it represented current U.S. counties or county equivalents. The coverage in Version 1.0 stopped at the coastline. There was no attempt to depict offshore areas. The created some problems when the coverage was used to assign county codes to sampling stations located near the coast. To help in this matter, Version 2.o includes offshore extensions of the county polygons. The (water) boundaries of many of these polygons are arbitrary. The Canadian Great Lakes features are another new addition to Version 2.0. They were added to improve the utility of the coverage for visual displays. Although the Canadian Great Lakes are logically represented by a single polygon, practical considerations -- the inability of some software to plot polygons with a large number of vertices -- made it necessary to separate them into 4 polygons. The dividing lines are located in narrow channels to minimize interference with plotting patterns. Canadian islands within the Great Lakes also were included. All tics were relocated to places that are easily visible on maps of the United States, to help in registering maps that may not otherwise have adequate registration information. To expedite accessing parts of the coverage, certain items have been indexed with the procedure, index_county.aml. See Section 3 above. A spatial index also was created. When using this coverage to clip or intersect other coverages, a tolerance as low as 2 meters can be used. The processing used to derive this coverage moved boundaries from their positions on the original maps. In cases of conflicting lines, preference was given to forming the correct topology. Strictly speaking, this coverage is not identical to the source materials. These changes were unavoidable in producing a continuous coverage of the conterminous United States. For revision 2.1, it was necessary to alter about 100 arcs. This was accomplished with ARCEDIT using the 1:100,000 TIGER county coverage as a background. These arcs were matched to the background so that they matched at least as close as other arcs that were not edited. For distribution with BASINS v1.0, the national coverage was split into a series of coverages that included the spatial extent of each of the nine US EPA regions, plus the hydrologic accounting units that crossed Region boundaries. The nine regional coverages therefore overlapped at Regional boundaries. The coverages were distributed in PC ARC/INFO coverage format. For distribution with Basins v2.0, the PA ARC/INFO coverages were exported on a PC then imported in workstation ARC/INFO v7.0.4. Each Regional coverage was then projected to geographic decimal degrees, NAD83. The coverages were then converted to ESRI Shapefile format, using the ARCSHAPE command. Reviews_Applied: This coverage has received no formal review. It has, however, been used in numerous applications where serious errors would have been obvious. Some county coverages were corrected following such use. The offshore polygon extensions and the Canadian Great Lakes polygons have had no review. BASINS v2.0 reviews: projected coverages were checked for topology. The shapefile format features and attributes were visually inspected and compared with the BASINS v1.0 PC ARC/INFO coverages. Other_Related_Data_Sets: This coverage was derived from USGS 1:2,000,000-scale basemaps covering the United States. References_Cited: Negri, M. Digital map of state boundaries of the conterminous United States. 1994. U.S. Geological Survey, digital map. Domeratz, M. A., Hallam, C. A., Schmidt, W. E., and Calkins, H. W., 1983. USGS Digital Cartographic Data Standards: Digital Line Graphs from 1:2,000,000-scale Maps. U.S. Geological Survey Circular 895-D, 38p. U. S. Geological Survey, 1970. National atlas of the United States of America: Washington D.C., U. S. Geological Survey, 417p. Time_Period_of_Content: Time_Period_Information: Single_Date/Time: Calendar_Date: 1994 Currentness_Reference: publication date Status: Progress: Complete Maintenance_and_Update_Frequency: None planned Spatial_Domain: Bounding_Coordinates: West_Bounding_Coordinate: -125.0000 East_Bounding_Coordinate: -66.0000 North_Bounding_Coordinate: 50.0000 South_Bounding_Coordinate: 24.0000 Keywords: Theme: Theme_Keyword_Thesaurus: None Theme_Keyword: County boundaries Place: Place_Keyword_Thesaurus: Geographic Names Information System Place_Keyword: Conterminous United States of America (CONUS) Place_Keyword: Alabama AL Place_Keyword: Arizona AZ Place_Keyword: Arkansas AR Place_Keyword: California CA Place_Keyword: Colorado CO Place_Keyword: Connecticut CT Place_Keyword: Delaware DE Place_Keyword: District of Columbia DC Place_Keyword: Florida FL Place_Keyword: Georgia GA Place_Keyword: Idaho ID Place_Keyword: Illinois IL Place_Keyword: Indiana IN Place_Keyword: Iowa IA Place_Keyword: Kansas KS Place_Keyword: Kentucky KY Place_Keyword: Louisiana LA Place_Keyword: Maine ME Place_Keyword: Maryland MD Place_Keyword: Massachusetts MA Place_Keyword: Michigan MI Place_Keyword: Minnesota MN Place_Keyword: Mississippi MS Place_Keyword: Missouri MO Place_Keyword: Montana MT Place_Keyword: Nebraska NE Place_Keyword: Nevada NV Place_Keyword: New Hampshire NH Place_Keyword: New Jersey NJ Place_Keyword: New Mexico NM Place_Keyword: New York NY Place_Keyword: North Carolina NC Place_Keyword: North Dakota ND Place_Keyword: Ohio OH Place_Keyword: Oklahoma OK Place_Keyword: Oregon OR Place_Keyword: Pennsylvania PA Place_Keyword: Rhode Island RI Place_Keyword: South Carolina SC Place_Keyword: South Dakota SD Place_Keyword: Tennessee TN Place_Keyword: Texas TX Place_Keyword: Utah UT Place_Keyword: Vermont VT Place_Keyword: Virginia VA Place_Keyword: Washington WA Place_Keyword: West Virginia WV Place_Keyword: Wisconsin WI Place_Keyword: Wyoming WY Access_Constraints: None Use_Constraints: None Native_Data_Set_Environment: ArcView shapefiles for Windows 95 PC Spatial_Reference_Information: Horizontal_Coordinate_System_Definition: Geographic: Latitude_Resolution: 0.0001 Longitude_Resolution: 0.0001 Geographic_Coordinate_Units: Decimal Degrees Geodetic_Model: Horizontal_Datum_Name: North American Datum of 1983 Ellipsoid_Name: Geodetic Reference System 80 Semi-major_Axis: 6378137 Denominator_of_Flattening_Ratio: 298.257 Entity_and_Attribute_Information: Detailed_Description: Entity_Type: Entity_Type_label: CNTY.SHP Entity_Type_Definition: County polygon attributes Entity_Type_Definition_Source: USGS Attribute: Attribute_Label: SHAPE Attribute_Definition: ArcView internal field Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Polygon Enumerated_Domain_Value_Definition: ArcView internal field Enumerated_Domain_Value_Definition_Source: Computed Attribute: Attribute_Label: AREA Attribute_Definition: Area of polygon in square coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Area of polygon Enumerated_Domain_Value_Definition_Source: computed Attribute: Attribute_Label: PERIMETER Attribute_Definition: Perimeter of polygon in coverage units Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Positive real numbers Enumerated_Domain_Value_Definition: Perimeter of polygon Enumerated_Domain_Value_Definition_Source: computed Attribute: Attribute_Label: CNTY_ Attribute_Definition: Internal feature number Attribute_Definition_Source: Computed Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: Internal feature number Enumerated_Domain_Value_Definition_Source: computed Attribute: Attribute_Label: CNTY_ID Attribute_Definition: User-assigned feature number Attribute_Definition_Source: User-defined Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: User assigned feature number Enumerated_Domain_Value_Definition_Source: USEPA Attribute: Attribute_Label: FIPS Attribute_Definition: County FIPS code Attribute_Definition_Source: FIPS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 01001-56999, none=0 Enumerated_Domain_Value_Definition: County FIPS numeric code Enumerated_Domain_Value_Definition_Source: FIPS Attribute: Attribute_Label: ST Attribute_Definition: 2 character state abbreviation Attribute_Definition_Source: FIPS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: Two characters Enumerated_Domain_Value_Definition: State FIPS alphabetic code Enumerated_Domain_Value_Definition_Source: FIPS Attribute: Attribute_Label: CNTYNAME Attribute_Definition: County name Attribute_Definition_Source: USGS GNIS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: alphabetical Enumerated_Domain_Value_Definition: County name Enumerated_Domain_Value_Definition_Source: USGS Attribute: Attribute_Label: PLYTYPE Attribute_Definition: Polygon type Attribute_Definition_Source: See Procedures Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: 0-4 and 9 Enumerated_Domain_Value_Definition: Polygon type Enumerated_Domain_Value_Definition_Source: USGS Attribute: Attribute_Label: WORKB Attribute_Definition: Basins Internal field Attribute_Definition_Source: USEPA Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: integer Enumerated_Domain_Value_Definition: Basins Internal Field Enumerated_Domain_Value_Definition_Source: USEPA Attribute: Attribute_Label: STCOFIPS Attribute_Definition: State and county FIPS code Attribute_Definition_Source: FIPS Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: State and county FIPS code Enumerated_Domain_Value_Definition_Source: FIPS Attribute: Attribute_Label: BEXT Attribute_Definition: Basins internal field Attribute_Definition_Source: USEPA Attribute_Domain_Values: Enumerated_Domain: Enumerated_Domain_Value: - Enumerated_Domain_Value_Definition: BASINS Internal field Enumerated_Domain_Value_Definition_Source: USEPA Distribution_Information: Distributor: Contact_Information: Contact_Organization_Primary: Contact_Organization: USEPA/Office of Water/OST Contact_Address: Address_Type: Mailing Address Address: 1200 Pennsylvania Ave., NW (4305T) City: Washington State_or_Province: District of Columbia Postal_Code: 20460 Country: USA Contact_Voice_Telephone: 202-566-0400 Contact_Facsimile_Telephone: 202-566-0409 Contact_Electronic_Mail_Address: basins@epa.gov Distribution_Liability: Although these data have been processed successfully on a computer system at Tetra Tech, Inc., no warranty expressed or implied is made regarding the accuracy or utility of the data on any other system or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. This disclaimer applies both to individual use of the data and aggregate use with other data. It is also strongly recommended that careful attention be paid to the contents of the metadata file associated with these data. The U.S. Environmental Protection Agency nor Tetra Tech, Inc. shall not be held liable for improper or incorrect use of the data described and/or contained herein. Standard_Order_Process: Digital_Form: Digital_Transfer_Information: Format_Name: Environmental Systems Research Institute (ESRI) ArcView Shapefile Digital_Transfer_Option: Online_Option: Computer_Contact_Information: Network_Address: Network_Resource_Name: http://www.epa.gov/waterscience/basins/ Offline_Option: Offline_Media: CD-ROM Recording_Format: ISO 9660 Fees: None Ordering_Instructions: When requesting data by phone or mail, please inquire about spatial data sets that work with Better Assessment Science Integrating Point and Nonpoint Sources (BASINS). The BASINS web page has instructions for downloading datasets. It also has a link to The National Center for Environmental Publications and Information (NCEPI), from which BASINS CD-ROMs may be ordered. Each CD-ROM contains the BASINS v2.0 Application and this data set along with others covering the spatial extent of an EPA Region. Metadata_Reference_Information: Metadata_Date: 20070611 Metadata_Contact: Contact_Information: Contact_Organization_Primary: Contact_Organization: USEPA/OW/OST Contact_Address: Address_Type: Mailing Address Address: 1200 Pennsylvania Ave., NW (4305T) City: Washington State_or_Province: District of Columbia Postal_Code: 20460 Country: USA Contact_Voice_Telephone: 202-566-0400 Contact_Facsimile_Telephone: 202-566-0409 Contact_Electronic_Mail_Address: basins@epa.gov Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata Metadata_Standard_Version: 19940608