Tarp Testing Guidance
On this page you will find:
- Interim guidance for testing soil fumigant tarps and information on how to submit test results to EPA
- Background information on EPA standards for tarp testing
Interim Guidance on How to Test Tarps and Submit Data to EPA
We are working to develop an American Society for Testing and Materials (ASTM) standard for tarp testing. Until the ASTM standard is approved, EPA provides this interim guidance for those interested in testing soil fumigant tarps so the tarps may be added, as appropriate, to either the agency’s tarp credit Web page and/or the dimethyl disulfide (DMDS) tarp Web page. We highly recommend that the testing procedures be followed as closely as possible. Since the reactivity, stability, and other chemical properties are different for each fumigant, the permeability of each fumigant through a film will be different. To assess comparability with existing permeability data, we also recommend conducting individual tart permeability tests for more than one fumigant.
Tarp Testing Protocol
In conjunction with the United States Department of Agriculture, Agricultural Research Service (USDA ARS), EPA has developed the following protocol for testing tarps.
Information to Submit to EPA
A) Description of tarp tested:
B) Test substances:
- Tarp manufacturer
- Tarp name/designation
- Tarp material
- Tarp thickness
- Other relevant descriptors or technical specifications
- Test fumigants (% purity)
- Other additives or solvents mixed with test substances
D) Test conditions:
- Description of test cells, including details of any modifications
- Analytical instrument(s) used, including instrumental parameters (e.g., manufacturer(s), column, detector, etc.)
E) Test notes:
- Test cell temperature
- Test cell humidity (if other than ambient)
- Testing protocol, including fumigant volumes/concentrations, sample collection schedule (number of samples, sample collection intervals, test duration), number of replicates
F) Test results:
- Description of deviations and modifications from the written procedure
- Calculated mass transfer coefficients from individual tests, including graphs.
- Averages and standard deviation of all replicates should be tabulated.
- Compound concentrations or corresponding peak response at each sampling interval, supported by chromatograms.
- Percent recovery of each compound at each sampling time (sum of source and collection chambers relative to the total amount applied).
- Analytical instrument calibration data.
How to Submit Tarp Data to EPA
Please submit the following by e-mail to Dana Friedman at firstname.lastname@example.org.
- A cover letter that indicates the tarp(s) and fumigant(s) tested.
- A PDF file containing the information described under Information to Submit to EPA.
- If the file is too large to email, please send by mail to:Attn: Dana FriedmanU.S. Environmental Protection AgencyOffice of Chemical Safety and Pollution PreventionOffice of Pesticide Programs, Pesticide Reevaluation Division1200 Pennsylvania Ave., NWMail Code 7508PWashington D.C. 20460
Attn: Thuy NguyenEnvironmental Science Center701 Mapes RoadFort George G. Meade, Maryland 20755-5350
Background on EPA Tarp Testing
EPA has completed a soil fumigant tarp permeability testing project and is working on developing an ASTM International standard for future tarp testing. The test method titled Film Permeability Determination Using Static Permeability Cells is currently undergoing an ASTM collaborative study. Once approved, the performance standard will eliminate the need for EPA to list individual tarps on the agency’s fumigant tarp web pages.
The development of the standard will provide a commonly accepted testing method and create a set of approved tarp testing criteria that will allow individuals to uniformly test tarps to determine the mass transfer coefficients (MTCs).
- Instead of referring to the EPA tarp credit web page, soil fumigant labels will list ranges of MTCs and the associated buffer zone reduction credits.
- The DMDS labels will also list the minimum MTCs for tarps required to be used with the products.
The agency anticipates that the standard will increase the number of tarps that are eligible for either buffer zone reduction credits or for use with products containing DMDS, thereby providing users with more options. We expect that the performance standard will be available in 2014.
During EPA’s reregistration of the soil fumigants, the use of tarps (i.e., high barrier films) was identified as one agricultural practice that can reduce fumigant emissions. The agency began testing commonly used agricultural tarps to determine how effectively each tarp could reduce fumigant emissions. The agency’s laboratory tarp testing method, discussed above, was adapted from a method previously developed by Sharon Papiernik and Scott Yates of USDA ARS (Papiernik et al., 2001, 2002). For more information, please see:
- Second Update To Health Effects Division Recommendations for Good Agricultural Practices and Associated Buffer Credits, EPA, January 11, 2011
- Evaluation of the Permeability of Agricultural Films to Various Fumigants, Environmental Science and Technology, October 5, 2011 Exit
Current labels for the soil fumigants chloropicrin, methyl bromide/chloropicrin, chloropicrin/1,3-dichloropropene, and metam sodium or metam potassium contain a link to our Tarps web page. This page lists tarps that qualify for buffer zone reduction credits based on testing using EPA’s method. In addition, tarps are required for use with products that contain dimethyl disulfide (DMDS). The agency’s DMDS tarps web page lists the tarps that are approved for use with these products.