An official website of the United States government.

This is not the current EPA website. To navigate to the current EPA website, please go to This website is historical material reflecting the EPA website as it existed on January 19, 2021. This website is no longer updated and links to external websites and some internal pages may not work. More information »

Burn Wise

Choosing the Right Hydronic Heater

On this page:

Hydronic Heater Basics

Hydronic heaters are pressurized or unpressurized fluid-based heaters located either inside or outdoors.  Hydronic heaters are also known as wood boilers, pellet boilers, outdoor boilers, and outdoor water stoves.  They burn wood fuels such as cord wood, wood pellets, wood chips, or corn.  Heat is transferred to either water or a water/anti-freeze solution, which is piped to the area to be heated.  These types of heaters are used for homes, barns, greenhouses, and garages.  

Indoor Hydronic Heater located in a garageIndoor Hydronic Heater (image courtesy of Fröling)

Outdoor Hydronic HeaterOutdoor Hydronic Heater (photo courtesy of Central Boiler Inc.)

Qualified vs. Certified

The EPA-qualified voluntary program for hydronic heaters ended in 2015, and most hydronic heaters that are "qualified" under EPA's Voluntary Hydronic Heater Program are not "certified" per EPA's Wood Heater New Source Performance Standard. Contact your state or local air quality agency for clarification on the type of wood-burning appliances, if any, that may legally be installed in your area. Find EPA-certified hydronic heaters.

Check Your State and Local Ordinances

Hydronic heater emissions are a significant concern in many local areas. Numerous scientific studies report potentially serious adverse health effects from breathing smoke emitted by residential wood combustion. Residential wood smoke contains fine particles, which can affect both the lungs and the heart. In some areas, residential wood smoke can be a significant source of exposure to fine particle pollution. Many local agencies have developed ordinances that ban or restrict the use of hydronic heaters, establish minimum distances to neighbors, and set minimum stack heights.

EPA-qualified Hydronic Heaters Program (terminated)

The Voluntary Hydronic Heater Program ended May 15, 2015.  This information is for historical purposes only.

EPA's Voluntary Hydronic Heater Partnership Program was first launched in 2007, providing a process for manufacturers to demonstrate models that were 70 percent cleaner than unqualified models. The program goal was to achieve early emission reductions, protecting public health sooner than a federal regulation. The program evolved to Phase 2, and EPA-qualified units were up to 90 percent cleaner than older, unqualified units.

Now that hydronic heaters are included in the New Source Performance Standard (NSPS) effective May 15, 2015, the Voluntary Hydronic Heater Program has sunset.
The list of certified hydronic heaters includes hydronic heaters formerly included in the voluntary program which meet Step 1, and in some cases, Step 2 of the 2015 NSPS. Some models in the voluntary program are not certified under the NSPS because they were tested with a pervious hydronic heater test method (M28 OWHH). The 2015 NSPS did provide a sell-through period for these models, allowing manufacturers and retailers to sell them until December 31, 2015. After this date, the models listed in the hydronic heater sell-through list can no longer be sold in the United States.