Portland Cement Manufacturing Industry: National Emission Standards for Hazardous Air Pollutants (NESHAP)
On this page:
Rule Summary
Portland Cement is the principal ingredient in concrete, which is used worldwide as the main building block of infrastructure construction as well as for commercial and residential structures.
Air toxics, also referred to as hazardous air pollutants (HAPs), are those pollutants that are known or suspected to cause cancer or other serious health effects. Portland cement manufacturing is an energy intensive process in which cement is made by grinding and heating a mixture of raw materials such as limestone, clay, sand, and iron ore in a rotary kiln. The kiln is a large furnace that is fueled by coal, oil, gas, coke and/or various waste materials. The product (called clinker) from the kiln is cooled, ground, and then mixed with a small amount of gypsum to produce portland cement.
The main source of air toxics emissions from a portland cement plant is the kiln. Emissions originate from the burning of fuels and heating of feed materials. Air toxics are also emitted from the grinding, cooling, and materials handling steps in the manufacturing process. Pollutants regulated under this rule are particulate matter, organic HAP, metals through the control of particulate matter, mercury, acid gases, and dioxin/furan.
Rule History
07/25/2018 - Final Risk and Technology Review Rule
09/21/2017 - Proposed Risk and Technology Review Rule
08/11/2017 - Good Cause Final Rule
08/11/2017 - Proposed Rule (reopening comment period)
06/19/2017 – Direct Final Rule
06/19/2017 - Parallel Proposed Rule
07/25/2016 - Direct Final Rule
07/25/2016 - Parallel Proposed Rule
09/11/2015 – Final Rule; correcting amendments
07/27/2015 – Final Amendments
11/19/2014 – Proposed Rule
02/12/2013 – Final Rule
07/18/2012 – Proposed Rules on Reconsideration
05/17/2011 - Denial in Part and Grant in Part of Petitions to Reconsider
01/18/2011 – Direct Final rule; amendments
09/09/2010 – Final Rule
06/09/2009 - Notice of Public Hearings and Extension of Public Comment Period
05/06/2009 – Proposed Rule
12/20/2006 – Final Rule
01/09/2006 – Proposed Rule
12/02/2005 – Proposed Rule; amendments
12/06/2002 – Final Rule; amendments
07/05/2002 – Final Rule; clarifications and corrections
07/02/2002 – Partial Withdrawal of Direct Final Rule
04/05/2002 – Proposed Rule & Direct Final Rule
10/04/2001 – Proposed Settlement for Public Comment
06/14/1999 – Final Rule
03/24/1998 – Proposed Rule
Additional Resources
Fact Sheet: Final Risk and Technology Review (7/13/2018)
Fact Sheet: Direct Final and Parallel Proposal (6/19/2017)
2010 Summary of Environmental and Cost Impacts for Portland Cement NESHAP
Regulatory Impact Analysis April 2009
Final Rules for Portland Cement Manufacturing Plants Fact Sheets (Actions from 1999 - 2015)
To find additional supporting documents for the rules until 2011, look through the documents in the docket folder.
To find additional supporting documents for the rules after 2011, look through the documents in the docket folder.
Regulation Navigation Tool: Reg Nav tools help owners and operators of facilities in certain industries determine the requirements of specific regulations. Reg Nav tools are online and interactive, and use the information entered to assess potential regulatory requirements.
Related Rules
NOx Control Technologies for the Cement Industry
Portland Cement Plants: New Source Performance Standards (NSPS)
Compliance
Applicability Determination Index (ADI). The ADI is maintained by EPA's Office of Enforcement and Compliance Assurance (OECA) and provides a data base of memoranda dealing with applicability issues. The database is searchable by Subpart.