Documents pertaining to Glass Manufacturing Effluent Guidelines (40 CFR Part 426)
- Amendments
- Initial Rulemaking
- 1975 rule: Subparts H-M
- 1974 rules:
- Subparts B-G
- Subpart A
You may need a PDF reader to view some of the files on this page. See EPA’s About PDF page to learn more.
-
Best Conventional Pollutant Control Technology; Effluent Limitations Guidelines; Final rule (PDF)(29 pp, 4 MB,
July 9, 1986,
51 FR 24974)
Revised BCT methodology and effluent limitations pursuant to litigation
- Best Conventional Pollutant Control Technology; Effluent Limitations Guidelines; Proposed rule (PDF)(26 pp, 3 MB, October 29, 1982, 47 FR 49176)
-
Best Conventional Pollutant Control Technology; Reasonableness of Existing Effluent Limitation Guidelines; Final rule (PDF)(32 pp, 4 MB,
August 29, 1979,
44 FR 50732)
Initial BCT methodology and effluent limitations; later revised after litigation. See July 9, 1986 final rule.
- Best Conventional Pollutant Control Technology; Reasonableness of Existing Effluent Limitation Guidelines; Proposed rule (PDF)(38 pp, 4 MB, August 23, 1978, 43 FR 37570)
-
Glass Manufacturing Effluent Guidelines - Final Rule (PDF)(11 pp, 2 MB,
January 16, 1975,
40 FR 2952)
Subparts H, J-M
-
Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Pressed and Blown Glass Segment of the Glass Manufacturing Point Source Category (PDF)(204 pp, 6 MB,
January 1975,
440/1-75/034a)
Industry description, wastewater characterization, treatment technologies, regulatory compliance cost estimates and pollutant loadings for the final rule (Subparts H-M)
-
Glass Manufacturing Effluent Guidelines - Proposed Rule (PDF)(14 pp, 2 MB,
August 21, 1974,
39 FR 30282)
Subparts H-M
-
Glass Manufacturing Effluent Guidelines - Final Rule (PDF)(8 pp, 1 MB,
February 14, 1974,
39 FR 5712)
Subparts B-G
-
Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Flat Glass Segment of the Glass Manufacturing Point Source Category (PDF)(139 pp, 4 MB,
January 1974,
440/1-74/001c)
Industry description, wastewater characterization, treatment technologies, regulatory compliance cost estimates and pollutant loadings for the final rule (Subparts B-G)
-
Glass Manufacturing Effluent Guidelines - Proposed Rule (PDF)(9 pp, 1 MB,
October 17, 1973,
38 FR 28902)
Subparts B-G
-
Glass Manufacturing Effluent Guidelines - Final Rule (PDF)(3 pp, 470 K,
January 22, 1974,
39 FR 2564)
Subpart A - BPT, BAT, NSPS, PSNS
-
Development Document for Effluent Limitations Guidelines and New Source Performance Standards for the Insulation Fiberglass Segment of the Glass Manufacturing Point Source Category (PDF)(112 pp, 5 MB,
January 1974,
440/1-74/001b)
Industry description, wastewater characterization, treatment technologies, regulatory compliance cost estimates and pollutant loadings for the final rule (Subpart A)
-
Glass Manufacturing Effluent Guidelines - Proposed rule (PDF)(5 pp, 901 K,
August 22, 1973,
38 FR 22606)
Subpart A - BPT, BAT, NSPS, PSNS